| Paste number 50577: | output of dmesg |
| Pasted by: | kobe8 |
| When: | 2 years, 3 months ago |
| Share: | Tweet this! | http://paste.lisp.org/+130X |
| Channel: | None |
| Paste contents: |
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe92400 (usable)
BIOS-e820: 000000007fe92400 - 0000000080000000 (reserved)
BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
1150MB HIGHMEM available.
896MB LOWMEM available.
Entering add_active_range(0, 0, 523922) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 523922
early_node_map[1] active PFN ranges
0: 0 -> 523922
On node 0 totalpages: 523922
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2301 pages used for memmap
HighMem zone: 292245 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP 000FBBF0, 0024 (r2 DELL )
ACPI: XSDT 7FE93E00, 005C (r1 DELL M08 27D70517 ASL 61)
ACPI: FACP 7FE93C9C, 00F4 (r4 DELL M08 27D70517 ASL 61)
ACPI: DSDT 7FE94400, 5629 (r2 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS 7FEA2C00, 0040
ACPI: HPET 7FE93F00, 0038 (r1 DELL M08 1 ASL 61)
ACPI: APIC 7FE94000, 0068 (r1 DELL M08 27D70517 ASL 47)
ACPI: MCFG 7FE93FC0, 003E (r16 DELL M08 27D70517 ASL 61)
ACPI: SLIC 7FE9409C, 0176 (r1 DELL M08 27D70517 ASL 61)
ACPI: BOOT 7FE93BC0, 0028 (r1 DELL M08 27D70517 ASL 61)
ACPI: SSDT 7FE926EB, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:15 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:15 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:74000000)
Built 1 zonelists. Total pages: 519829
Kernel command line: root=/dev/disk/by-id/scsi-SATA_ST9160821AS_5MA3AFMP-part6 vga=0x314 resume=/dev/sda5 splash=silent showopts
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1995.190 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2069640k/2095688k available (1825k kernel code, 24688k reserved, 764k data, 228k init, 1178184k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc038e000 - 0xc03c7000 ( 228 kB)
.data : 0xc02c86ed - 0xc0387964 ( 764 kB)
.text : 0xc0100000 - 0xc02c86ed (1825 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Calibrating delay using timer specific routine.. 3994.60 BogoMIPS (lpj=7989219)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Unpacking initramfs... done
Freeing initrd memory: 4040k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 844 Objects with 98 Devices 251 Methods 20 Regions
Parsing all Control Methods:
Table [SSDT](id 0002) - 13 Objects with 0 Devices 4 Methods 0 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=7980014)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
Total of 2 processors activated (7984.61 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
migration_cost=25
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 4 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:.................................................................................
Initialized 18/20 Regions 16/18 Fields 28/29 Buffers 19/31 Packages (866 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 0 _STA executions (examined 103 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:05: ioport range 0xc80-0xcff could not be reserved
pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
pnp: 00:09: ioport range 0x900-0x97f has been reserved
pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:09: ioport range 0x1000-0x1005 has been reserved
pnp: 00:09: ioport range 0x1008-0x100f has been reserved
pnp: 00:0a: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:0a: ioport range 0x1006-0x1007 has been reserved
pnp: 00:0a: ioport range 0x100a-0x1059 could not be reserved
pnp: 00:0a: ioport range 0x1060-0x107f has been reserved
pnp: 00:0a: ioport range 0x1080-0x10bf has been reserved
pnp: 00:0a: ioport range 0x10c0-0x10df has been reserved
pnp: 00:0a: ioport range 0x1010-0x102f has been reserved
pnp: 00:0b: iomem range 0x0-0x9efff could not be reserved
pnp: 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
Time: tsc clocksource has been installed.
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
PCI: Bridge: 0000:00:01.0
IO window: e000-efff
MEM window: fa000000-feafffff
PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: f9f00000-f9ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.3
IO window: d000-dfff
MEM window: f9c00000-f9efffff
PREFETCH window: f0000000-f01fffff
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: f9b00000-f9bfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: f9a00000-f9afffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x79 set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1194608111.640:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie02]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
vesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, using 3750k, total 14336k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:b650
vesafb: pmi: set display start = c00cb6b3, set palette = c00cb70e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78734 bytes
bootsplash: ...found (800x600, 27773 bytes, v3).
Console: switching to colour frame buffer device 96x33
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
input: PS/2 Generic Mouse as /class/input/input2
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: SSDT 7FE930F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 009B) - 6 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7FE92BB7, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 009C) - 1 Objects with 0 Devices 1 Methods 0 Regions
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7FE93378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00A0) - 4 Objects with 0 Devices 4 Methods 0 Regions
ACPI: SSDT 7FE9306D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Parsing all Control Methods:
Table [SSDT](id 00A1) - 1 Objects with 0 Devices 1 Methods 0 Regions
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to: possible TSC halt in C2.
ACPI: Thermal Zone [THM] (39 C)
Time: hpet clocksource has been installed.
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match
Clocksource tsc unstable (delta = -83076477 ns)
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 cmd 0xf8860900 ctl 0x00000000 bmdma 0x00000000 irq 218
ata2: DUMMY
ata3: SATA max UDMA/133 cmd 0xf8860a00 ctl 0x00000000 bmdma 0x00000000 irq 218
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST9160821AS, 3.CDD, max UDMA/133
ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.CD PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00016fa0 irq 14
ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00016fa8 irq 15
ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE04, max UDMA/33
ata4.00: configured for UDMA/33
ata5: port disabled. ignoring.
scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE04 PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
usb usb3: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new device found, idVendor=0a5c, idProduct=4500
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: BCM2045B2
usb 1-2: Manufacturer: Broadcom
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40
usb usb5: new device found, idVendor=0000, idProduct=0000
usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: new device found, idVendor=0000, idProduct=0000
usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
hub 1-2:1.0: hub_port_status failed (err = -71)
hub 1-2:1.0: connect-debounce failed, port 2 disabled
usb usb6: Product: EHCI Host Controller
hub 1-2:1.0: cannot disable port 2 (err = -71)
hub 1-2:1.0: hub_port_status failed (err = -71)
usb usb6: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: new device found, idVendor=0000, idProduct=0000
usb 1-2: USB disconnect, address 2
usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
usb 7-6: new high speed USB device using ehci_hcd and address 2
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb 7-6: new device found, idVendor=05a9, idProduct=2640
usb 7-6: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-6: Product: Laptop Integrated Webcam
usb 7-6: Manufacturer: OmniVision Technologies, Inc. -2640-07.05.16.3
usb 7-6: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: new device found, idVendor=0a5c, idProduct=4500
usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: BCM2045B2
usb 1-2: Manufacturer: Broadcom
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 3 ports detected
usb 1-2.2: new full speed USB device using uhci_hcd and address 4
usb 1-2.2: new device found, idVendor=0a5c, idProduct=4502
usb 1-2.2: new device strings: Mfr=1, Product=0, SerialNumber=0
usb 1-2.2: Manufacturer: Broadcom Corp
usb 1-2.2: configuration #1 chosen from 1 choice
usb 1-2.3: new full speed USB device using uhci_hcd and address 5
usb 1-2.3: new device found, idVendor=0a5c, idProduct=4503
usb 1-2.3: new device strings: Mfr=1, Product=0, SerialNumber=0
usb 1-2.3: Manufacturer: Broadcom Corp
usb 1-2.3: configuration #1 chosen from 1 choice
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SBTN]
ACPI: Battery Slot [BAT0] (battery present)
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
ACPI: AC Adapter [AC] (on-line)
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:03 failed with error -16
tg3.c:v3.77 (May 31, 2007)
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:09:00.0 to 64
ieee80211_crypt: registered algorithm 'NULL'
Linux agpgart interface v0.102 (c) Dave Jones
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
Linux video capture interface: v2.00
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640)
uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
uvcvideo: Failed to initialize the device (-5).
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1a:a0:fc:66:6b
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22
ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2dmpr
mmc0: SDHCI at 0xf9aff400 irq 22 DMA
ipw3945: Copyright(c) 2003-2006 Intel Corporation
usbcore: registered new interface driver hiddev
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
input: Broadcom Corp as /class/input/input6
input: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2
input: Broadcom Corp as /class/input/input7
input: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9aff800-f9afffff] Max Packet=[2048] IR/IT contexts=[4/4]
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:0c:00.0 to 64
ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=0x13, fmic=0x0, line=0x0, fline=0xe, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_sigmatel.c:1299: dac_nids=1 (0x5/0x0/0x0/0x0/0x0)
Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[4a4fc000267c0470]
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fuse init (API version 7.8)
AppArmor: AppArmor initialized
audit(1194608129.128:2): type=1505 info="AppArmor initialized" pid=2335
bootsplash: status on console 0 changed to on
powernow: This module only works with AMD K7 CPUs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
ADDRCONF(NETDEV_UP): eth0: link is not ready
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
st: Version 20070203, fixed bufsize 32768, s/g segs 256
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ip6_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ata1.00: exception Emask 0x2 SAct 0x1c SErr 0x0 action 0x2 frozen
ata1.00: spurious completions during NCQ issue=0x10 SAct=0x1c FIS=004040a1:00000002
ata1.00: cmd 61/08:10:bb:bc:2c/00:00:10:00:00/40 tag 2 cdb 0x0 data 4096 out
res 40/00:20:83:64:2b/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/08:18:f3:26:2d/00:00:10:00:00/40 tag 3 cdb 0x0 data 4096 out
res 40/00:20:83:64:2b/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1.00: cmd 61/40:20:83:64:2b/00:00:10:00:00/40 tag 4 cdb 0x0 data 32768 out
res 40/00:20:83:64:2b/00:00:10:00:00/40 Emask 0x2 (HSM violation)
ata1: soft resetting link
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
lp: driver loaded but no devices found
lp: driver loaded but no devices found
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=0x13, fmic=0x0, line=0x0, fline=0xe, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_sigmatel.c:1299: dac_nids=1 (0x5/0x0/0x0/0x0/0x0)
lp: driver loaded but no devices found
lp: driver loaded but no devices found
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
audit(1194605088.936:3): audit_pid=8296 old=0 by auid=4294967295
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ieee80211_crypt: registered algorithm 'TKIP'
eth1: no IPv6 routers present
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=0x13, fmic=0x0, line=0x0, fline=0xe, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_sigmatel.c:1299: dac_nids=1 (0x5/0x0/0x0/0x0/0x0)
ADDRCONF(NETDEV_UP): eth1: link is not ready
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA sound/pci/hda/hda_codec.c:2331: autoconfig: line_outs=1 (0xf/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2335: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2339: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:2347: inputs: mic=0x13, fmic=0x0, line=0x0, fline=0xe, cd=0x0, aux=0x0
ALSA sound/pci/hda/patch_sigmatel.c:1299: dac_nids=1 (0x5/0x0/0x0/0x0/0x0)
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=368 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=348
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=257 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=237
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=368 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=348
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=368 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=348
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=338 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=318
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=181 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=161
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=181 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=161
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=382 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=362
eth1: no IPv6 routers present
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:0a:e4:5a:f9:f7:08:00 SRC=192.168.1.133 DST=192.168.1.100 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=42609 PROTO=UDP SPT=137 DPT=1034 LEN=70
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:0a:e4:5a:f9:f7:08:00 SRC=192.168.1.133 DST=192.168.1.100 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=42622 PROTO=UDP SPT=137 DPT=1034 LEN=70
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:0a:e4:5a:f9:f7:08:00 SRC=192.168.1.133 DST=192.168.1.100 LEN=90 TOS=0x00 PREC=0x00 TTL=128 ID=42629 PROTO=UDP SPT=137 DPT=1034 LEN=70
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT-INV IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:04:ed:58:34:0a:08:00 SRC=63.236.73.173 DST=192.168.1.100 LEN=40 TOS=0x00 PREC=0x00 TTL=30 ID=0 PROTO=TCP SPT=80 DPT=18565 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:04:ed:58:34:0a:08:00 SRC=63.236.73.173 DST=192.168.1.100 LEN=40 TOS=0x00 PREC=0x00 TTL=30 ID=0 PROTO=TCP SPT=80 DPT=18564 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:04:ed:58:34:0a:08:00 SRC=63.236.73.173 DST=192.168.1.100 LEN=40 TOS=0x00 PREC=0x00 TTL=30 ID=0 PROTO=TCP SPT=80 DPT=18564 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:04:ed:58:34:0a:08:00 SRC=63.236.73.173 DST=192.168.1.100 LEN=40 TOS=0x00 PREC=0x00 TTL=30 ID=0 PROTO=TCP SPT=80 DPT=18582 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:04:ed:58:34:0a:08:00 SRC=63.236.73.173 DST=192.168.1.100 LEN=40 TOS=0x00 PREC=0x00 TTL=30 ID=0 PROTO=TCP SPT=80 DPT=18582 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:04:ed:58:34:0a:08:00 SRC=63.236.73.173 DST=192.168.1.100 LEN=40 TOS=0x00 PREC=0x00 TTL=30 ID=0 PROTO=TCP SPT=80 DPT=18582 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-INext-DROP-DEFLT-INV IN=eth1 OUT= MAC=00:1b:77:80:c2:7b:00:04:ed:58:34:0a:08:00 SRC=63.236.73.173 DST=192.168.1.100 LEN=40 TOS=0x00 PREC=0x00 TTL=30 ID=0 PROTO=TCP SPT=80 DPT=18582 WINDOW=0 RES=0x00 ACK RST URGP=0
SFW2-OUT-ERROR IN= OUT=eth1 SRC=192.168.1.100 DST=192.168.1.133 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=43177 DF PROTO=TCP SPT=6083 DPT=139 WINDOW=54 RES=0x00 ACK RST URGP=0 OPT (0101080A001F425B0001A5E0)
SFW2-OUT-ERROR IN= OUT=eth1 SRC=192.168.1.100 DST=192.168.1.133 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=27313 DF PROTO=TCP SPT=19446 DPT=139 WINDOW=80 RES=0x00 ACK RST URGP=0 OPT (0101080A001F425B0001A5E0)
SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 This paste has no annotations.